The Lightswing® is the suspension system that allows you to move pendant lights. The arm of the Lightswing® can slide and rotate, making it easy to hang a pendant light in a different location. This is a great solution when your connection point is not in the right place, or when you want to connect two lamps at the same point. If you want to learn more about how the Lightswing® works, take a look at our how it works page and watch the video below.
The Lightswing® is designed for pendant lamps. When choosing a pendant lamp that can be mounted on the Lightswing®, it is important to consider three things:
Depending on the Lightswing® model you choose, it is suitable for pendant lamps with a maximum weight of 2.5 kg or 3.5 kg.
The pendant lamp should have only one cord containing the power wires.
Avoid pendant lamps with a built-in dimmer or transformer.
The Lightswing® Zero is suitable for linear pendant lamps or models with a ceiling bar for multiple lamps, with a maximum weight of 10 kg.
How much weight the Lightswing® can hold depends on the Lightswing® model you choose:
Lightswing® Single 90cm: One pendant lamp with a maximum weight of 3.5 kg.
Lightswing® Twin 90cm: Two pendant lamps with a maximum of 3.5 kg per lamp (total 7 kg). A single lamp must never exceed 3.5 kg.
Lightswing® Single 110cm: One pendant lamp with a maximum weight of 2.5 kg.
Lightswing® Twin 110cm: Two pendant lamps with a maximum of 2.5 kg per lamp (total 5 kg). A single lamp must never exceed 2.5 kg.
Lightswing® Zero: Multiple pendant lamps with a total maximum weight of 10 kg.
Basically, any ceiling is suitable for the Lightswing®. However, the ceiling must be strong enough to support the weight of the pendant lamp and the Lightswing®. If necessary, reinforcement can be applied to the central box first. Check carefully whether a screw with a plug has optimal grip in the ceiling before attaching the Lightswing®.
With the help of the mounting ring, the Lightswing® can be mounted in any desired location. With the mounting ring, the Lightswing® does not need to be placed directly over the central junction box. However, make sure that the mounting point is accessible for an electrical cable. If needed, you can use a cable duct for this purpose. Please consult our online manual or PDF manual for more information.
